Displaying: All Days | All Locations | All Activities | Composites Manufacturing & Advanced Materials
John D. Russell, D.Sc., FSME
Chief, Structures Technology Branch
Air Force Research Laboratory
Head of Product Development
Solvay Composite Materials
Waruna Seneviratne, PhD
Director - NIAR ATLAS
National and Key Accounts Manager
Ingersoll Machine Tools, Inc.
The need for automation in the manufacture of aerospace composite components will be increasing over the next decade if forecasts for a coming wave of new commercial and military aircraft as well as Urban Air Mobility platforms stress the current composites industrial base. A key variable that is often overlooked on automation is the material. It is taken for granted that we can use current aerospace composite materials for automation solutions. This panel will explore materials needs for future aerospace components and discuss what needs to happen to optimize them for automation, will maintaining their properties.
Moderator: Dr. John Russell D.Sc., Chief, Structures Technology Branch, Air Force Research Laboratory
Technical Sales & Business Development Manager
In the past it was easy to determine a part was done by ATL or AFP. Easy parts were mainly done by Automatic Tape Laying ATL, complex ones were typically done by Automatic Fiber Placement AFP. Today, it is needed to determine the right business case for each part based on scrap ratio, productivity, and feasibility. This presentation will define 2-3 business cases examples justifying the final machine selection architecture and technology, focusing on latest, MTorres Tape Laying technology called V3 ATL head. Due to the increase in speed, and lower acquisition price of ATL vs AFP, the new head is bringing new life into the ATL world.
In recent years there has been a continual advancement in thermoplastic parts. Improvements have come from many different sources, working together to produce, test and improve the whole process of production. The thermoplastic prepreg, machine builders, and process steps have been continually improved to bring about final parts that can be used in aviation.
In this presentation we will specifically look at the automated layup process of high-temperature thermoplastic prepreg, on complex shaped parts. The problems that arise in this process are numerous, but there has been continual advancement in improving the process parameters, machine hardware and methods of control. We have been performing many real layup tests on coupons, small scale parts, and mid-size prototype parts, using PPS, PAEK, PEKK, and PEEK material from most world-known prepreg suppliers. From these results, we discuss the improvements in various process control methods utilized to get much better final parts than it has been expected from the past and how Tier 1 suppliers are using these results for final material selection. Finally, we present briefly how to transition some of those learnings to tool-less manufacturing of TPCs and discuss some limits, capabilities, and future opportunities in expanding this novel approach to new markets for TPC manufacturing.
Director, Fiber Placement
There are at least three significant cost driving problems with the lamination of modern composite aerospace components. These problems are exaggerated for high production rate systems but affect all forms of automated fiber placement style lamination. 1) The utilization of AFP lamination equipment is structurally stuck at about 25-30%. This is true even though the systems have improved immensely in both reliability and performance. 2) The input costs are very high, for example carbon fiber prepreg or thermoplastic. 3) Autoclaves are huge and expensive and Airframers seem to dislike them a great deal.
This presentation will address the problems associated with item (1) poor utilization of AFP equipment and the steps we have taken to increase it by a factor of at least 4. We will explain how the quality systems in place structurally hold our AFP equipment to such low utilization and explain how AFP4.0 address these factors. AFP4.0’s main thrust maintains the safeguards that ensure acceptable laminations but automate the manual interventions that currently happen between each ply which are the cause of this low utilization.
Composite Automation, LLC
Introduce the history of Fiber Patch Placement with the goal of creating context for the progression of the technology. Thereafter, I will show the various applications where Fiber Patch Placement has had a significant impact in meeting or exceeding manufacturing metrics for success as well as new applications. I will then inform the group about the new system available for Manufacturing Research and Development at the National Institute of Aviation Research’s ATLAS lab in Wichita, KS.
Yourri-Samuel Dessureault, PhD
Manufacturing Research and Development Engineer
This presentation will demonstrate a method of producing aerospace quality structural members by using common equipment and materials, which together create a step molding process that emulates pultrusion. By introducing a step press technique, the short coming that hot pressing has of requiring a large mold to produce the part in a single step can be eliminated. Polyphenylene sulfide commingled carbon fiber braiding was pressed in a specially designed tool to validate the viability of the work. The resulting parts were of several common structural member geometries including straight and curved t-section and hat channels. Additionally, large beaded panel was proven to be manufacturable. Together, a demonstration of a simple yet effective thermoplastic composite processing method that could be implemented in the aerospace industry without the need for advanced technology was established.
Composites Product Manager
Unless someone is involved in manufacturing, when a person hears the word robot, they most likely picture a machine out of a sci-fi film that resembles a human. The term robot probably also draws up the fear in most of us that robots will someday make our jobs obsolete. In fact, robots already exist in many manufacturing facets to improve quality, efficiency, and profitability. This presentation seeks to explain the different composites processes that currently take advantage of the unique skillset robots offer, the pros and cons of selecting robotics, the future projections of robots, and why we should welcome them with open arms instead of dreading their arrival in the world of automated composites.
Ingersoll Machine Tools, Inc.
Large format composites manufacturing suffers from high costs of retooling. As automated layup reaches new industries, market demand for equipment targeting decades-long production runs becomes less common. Automated Fiber Placement (AFP) and its deployment in manufacturing systems must respond with innovative equipment configurations and flexible processes.
Concurrently, large-format additive manufacturing (LFAM) is experiencing a generational change. Experts are emerging while machine builders and material suppliers are maturing. A demanding and concentrated user group with unique process challenges requires focused yet flexible solutions.
This presentation highlights application concepts born from the acceleration of LFAM and the paradigm shift in production AFP. Case studies, market segments and emerging technology will be discussed in depth while focusing on the hybrid machine tool as an enabling design principle.
Ingersoll Machine Tools (Rockford, IL) brings to Additive Manufacturing an over 125-year history of engineering innovation in large scale machine tools for the aerospace, transportation, energy and defense industries. Today Ingersoll designs and builds advanced subtractive and additive manufacturing machines for a wide variety of complex processes and motion control applications.